20 Netstat Commands for Linux Network Management
You might also be interested in following article
# netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 52 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED
tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT
tcp 0 0 localhost:smtp *:* LISTEN
tcp 0 0 *:59482 *:* LISTEN
udp 0 0 *:35036 *:*
udp 0 0 *:npmp-local *:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 16972 /tmp/orbit-root/linc-76b-0-6fa08790553d6
unix 2 [ ACC ] STREAM LISTENING 17149 /tmp/orbit-root/linc-794-0-7058d584166d2
unix 2 [ ACC ] STREAM LISTENING 17161 /tmp/orbit-root/linc-792-0-546fe905321cc
unix 2 [ ACC ] STREAM LISTENING 15938 /tmp/orbit-root/linc-74b-0-415135cb6aeab
# netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *:ssh *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 localhost:smtp *:* LISTEN
tcp 0 52 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED
tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT
# netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:35036 *:*
udp 0 0 *:npmp-local *:*
udp 0 0 *:mdns *:*
# netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 0 *:58642 *:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
udp 0 0 *:35036 *:*
udp 0 0 *:npmp-local *:*
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 16972 /tmp/orbit-root/linc-76b-0-6fa08790553d6
unix 2 [ ACC ] STREAM LISTENING 17149 /tmp/orbit-root/linc-794-0-7058d584166d2
unix 2 [ ACC ] STREAM LISTENING 17161 /tmp/orbit-root/linc-792-0-546fe905321cc
unix 2 [ ACC ] STREAM LISTENING 15938 /tmp/orbit-root/linc-74b-0-415135cb6aeab
# netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *:dctp *:* LISTEN
tcp 0 0 *:mysql *:* LISTEN
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 0 *:munin *:* LISTEN
tcp 0 0 *:ftp *:* LISTEN
tcp 0 0 localhost.localdomain:ipp *:* LISTEN
tcp 0 0 localhost.localdomain:smtp *:* LISTEN
tcp 0 0 *:http *:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
tcp 0 0 *:https *:* LISTEN
# netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:39578 *:*
udp 0 0 *:meregister *:*
udp 0 0 *:vpps-qua *:*
udp 0 0 *:openvpn *:*
udp 0 0 *:mdns *:*
udp 0 0 *:sunrpc *:*
udp 0 0 *:ipp *:*
udp 0 0 *:60222 *:*
udp 0 0 *:mdns *:*
# netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 4171 @ISCSIADM_ABSTRACT_NAMESPACE
unix 2 [ ACC ] STREAM LISTENING 5767 /var/run/cups/cups.sock
unix 2 [ ACC ] STREAM LISTENING 7082 @/tmp/fam-root-
unix 2 [ ACC ] STREAM LISTENING 6157 /dev/gpmctl
unix 2 [ ACC ] STREAM LISTENING 6215 @/var/run/hald/dbus-IcefTIUkHm
unix 2 [ ACC ] STREAM LISTENING 6038 /tmp/.font-unix/fs7100
unix 2 [ ACC ] STREAM LISTENING 6175 /var/run/avahi-daemon/socket
unix 2 [ ACC ] STREAM LISTENING 4157 @ISCSID_UIP_ABSTRACT_NAMESPACE
unix 2 [ ACC ] STREAM LISTENING 60835836 /var/lib/mysql/mysql.sock
unix 2 [ ACC ] STREAM LISTENING 4645 /var/run/audispd_events
unix 2 [ ACC ] STREAM LISTENING 5136 /var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 6216 @/var/run/hald/dbus-wsUBI30V2I
unix 2 [ ACC ] STREAM LISTENING 5517 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 5531 /var/run/pcscd.comm
# netstat -s
Ip:
2461 total packets received
0 forwarded
0 incoming packets discarded
2431 incoming packets delivered
2049 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
Tcp:
159 active connections openings
1 passive connection openings
4 failed connection attempts
0 connection resets received
1 connections established
2191 segments received
1745 segments send out
24 segments retransmited
0 bad segments received.
4 resets sent
Udp:
243 packets received
1 packets to unknown port received.
0 packet receive errors
281 packets sent
# netstat -st
Tcp:
2805201 active connections openings
1597466 passive connection openings
1522484 failed connection attempts
37806 connection resets received
1 connections established
57718706 segments received
64280042 segments send out
3135688 segments retransmited
74 bad segments received.
17580 resets sent
# netstat -su
Udp:
1774823 packets received
901848 packets to unknown port received.
0 packet receive errors
2968722 packets sent
# netstat -tp
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED 2179/sshd
tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT 1939/clock-applet
# netstat -ac 5 | grep tcp
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 0 *:58642 *:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 localhost:smtp *:* LISTEN
tcp 1 0 192.168.0.2:59447 www.gov.com:http CLOSE_WAIT
tcp 0 52 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 localhost:smtp *:* LISTEN
tcp 0 0 *:59482 *:* LISTEN
# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
# netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 4459 0 0 0 4057 0 0 0 BMRU
lo 16436 0 8 0 0 0 8 0 0 0 LRU
# netstat -ie
Kernel Interface table
eth0 Link encap:Ethernet HWaddr 00:0C:29:B4:DA:21
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feb4:da21/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4486 errors:0 dropped:0 overruns:0 frame:0
TX packets:4077 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2720253 (2.5 MiB) TX bytes:1161745 (1.1 MiB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)
# netstat -g
IPv6/IPv4 Group Memberships
Interface RefCnt Group
--------------- ------ ---------------------
lo 1 all-systems.mcast.net
eth0 1 224.0.0.251
eth0 1 all-systems.mcast.net
lo 1 ff02::1
eth0 1 ff02::202
eth0 1 ff02::1:ffb4:da21
eth0 1 ff02::1
# netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:36944 TIME_WAIT
tcp 0 0 tecmint.com:http sg2nlhg010.shr.prod.s:42110 TIME_WAIT
tcp 0 132 tecmint.com:ssh 115.113.134.3.static-:64662 ESTABLISHED
tcp 0 0 tecmint.com:http crawl-66-249-71-240.g:41166 TIME_WAIT
tcp 0 0 localhost.localdomain:54823 localhost.localdomain:smtp TIME_WAIT
tcp 0 0 localhost.localdomain:54822 localhost.localdomain:smtp TIME_WAIT
tcp 0 0 tecmint.com:http sg2nlhg010.shr.prod.s:42091 TIME_WAIT
tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:36998 TIME_WAIT
# netstat --verbose
netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.
# netstat -ap | grep http
tcp 0 0 *:http *:* LISTEN 9056/httpd
tcp 0 0 *:https *:* LISTEN 9056/httpd
tcp 0 0 tecmint.com:http sg2nlhg008.shr.prod.s:35248 TIME_WAIT -
tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:57783 TIME_WAIT -
tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:57769 TIME_WAIT -
tcp 0 0 tecmint.com:http sg2nlhg008.shr.prod.s:35270 TIME_WAIT -
tcp 0 0 tecmint.com:http sg2nlhg009.shr.prod.s:41637 TIME_WAIT -
tcp 0 0 tecmint.com:http sg2nlhg009.shr.prod.s:41614 TIME_WAIT -
unix 2 [ ] STREAM CONNECTED 88586726 10394/httpd
# netstat --statistics --raw
Ip:
62175683 total packets received
52970 with invalid addresses
0 forwarded
Icmp:
875519 ICMP messages received
destination unreachable: 901671
echo request: 8
echo replies: 16253
IcmpMsg:
InType0: 83
IpExt:
InMcastPkts: 117
// usercontrol params
private static final int FLAG_TO_DISABLE_USER = 0x2;
private static final String USER_ACCOUNT_CONTROL_ATTR_NAME = "useraccountcontrol"; // userAccountControl
private static final String ENABLE = "enable";
private static final String DISABLE = "disable";
Or, in the terminal:sudo apt-get install imagemagick
cd
mogrify -resize 50% -format jpg *
mogrify -resize 800x600 -format jpg *
mogrify -resize 800x -format jpg *
This tag defines the style html that will be designed with the div which will contain the document. Pay attention to values of top, width and height: they can be written in % or in pixel. SpagoBI recommends the pixel mode because it is more precise and make better use of the available space. Everything we write in this tag, will become the style of final tag.
Indicates the beginning of the list of parameters of the recorded document. In this section we must define all the input/output parameters of the document.
For every parameter, we need to define:
* the label by which the parameter is saved into SpagoBI (the url in detail document section).
* the type of the parameter: IN if is an input parameter, OUT if is an output parameter (by which the document refresh others documents).
* thedefault_value: is a value that the engine pass to the document if is not found explicitly in the url.
Indicates possible links with other documents. And for each document linked, we would need to define:
* the label of document linked
* the label of parameter linked
Notes: This tag can be repeated in case there are more than one input parameter for other documents in the page. With this example, if the user clicks on the report, it will refresh the chart with label “BC_SC_ByProdCat” updating the parameter ‘ProdCatType’ with the value clicked.
In SpagoBI 3.1, it is possible to cross navigate on external document setting by a typeCross attribute (EXTERNAL or INTERNAL). It means that now the composite document is very open. By default the cross type is internal.
Example:
Create a SpagoBI document as below:
Locate the template file and save the document. And finally execute the document to play with our interactive cockpit.
Others clarifications: